|
 |
The TCE kit that started it all....This kit has been in production since 1993 and is now offered only in non stock wheel form. TCE no longer offers the original SHOstopper rotor hat with its built in wheel spacer. Today we offer only SHOstopper Plus kits: 13" x 1.10" using a lesser offset hat. We also require the customer supply either their knuckles for modification, replacments to be modified, or we will source and sell you a set at an additional charge- see notes below.
SHOstopper Plus: Complete front BBK $1479
- Forged Superlite caliper with stainless steel pistons
- Steel mounting brackets
- Aluminum rotor hats
- 13" x 1.10" Directional vane rotors
- Gas slotted, zinc plated
- Wilwood BP-10 pads
- Hoses
- Machining of steering knuckles
- Hardware
Options:- Sub BSL6 Calipers- Add $250
- Drilled and slotted finish- Add $135
- Earl's SOLO Bleeders- Add $30
- Sub RED finished FSL calipers- Add $125
- Powder Coat steering knuckles- Add $65
- Extended length wheel studs (requires TCE hubs, installed)- Add $35
- TCE supplied hub and bearing kit (installed)- Add $225
- TCE supplied steering knuckles for kit- Add $130
- Wilwood 570 Brake fluid- Add $9per
Knuckle and machining options:- Customer supplies steering knuckles off their vehicle for re use. Machine work is done with hubs and bearings in place and returned as supplied. (cannot be powder coated)
- Customer supplies steering knuckles off their vehicle for re use. Hubs and bearings are removed, machine work is performed. Optional purchase of new hubs and bearings above. Optional powder coating.
- Customer supplies steering knuckles from alternate source. Hubs and bearings are removed, machine work performed and bare castings are returned. Optional purchase of new hubs and bearings above. Optional powder coating.
- TCE supplies steering knuckles from local wrecking yard. Hubs and bearings are removed, machine work performed and bare castings are returned. Optional purchase of new hubs and bearings above. Optional powder coating.
|
|
