CURRENT KITS

350Z and G35

370Z and G37

Camaro 2010+

Charger, Challenger, Magnum, 300C

Chevy Colorado

Cobalt and HHR

Contour and Cougar

Corvette C2&C3

Corvette C4

Corvette C5, Z06

Corvette C6, Z06

Corvette C7

Countryman/Paceman by MINI

Crown Vic- Panther

Dart

Dodge RAM 1500

Eclipse 1G

Eclipse 2G

F150 (2010+)

Fiesta

Focus 00-'07

Focus 2012+

Ford Ranger

Fusion '13+

Impala SS 94-96

Impala/Caprice '71-'76

Jeep Cherokee

Juke

Lancia Scorpion

Lightning, Harley F150 99-04

Marauder

Mazda 3

Mazda 6

Mazda RX8

MINI 01-06

MINI 07-13

MINI 2014+

Mustang 05-13

Mustang 2015-

Mustang 94-04

RSX

SHO '89-95

SHO, Flex, Explorer, MKS 2010+

Solstice/Sky

SRT-4

Subaru WRX 08+

Subaru WRX 99-05

Super Duty 1999-2004

Super Duty 2005-2012

Super Duty 2013+

Tiburon

Titan-Armada

XXX Customs

TCE Performance Products

Popular service items for both Wilwood and TCE/Wilwood kits

Wilwood does not offer complete "Rebuild Kits" for calipers, the items necessary must be purchased individually such as Seal Kits, Pistons, Bleeders and such. TCE suggests that if you plan to service your caliper(s) that you consider adding both the Assembly Lube and our Cap/Plug kit to your order. The lube is important for proper seal break-in and the Cap/Plug kit is intended to fit your -3AN hose ends and caliper fittings thus preventing excessive fluid leaks. Cross over seas for DL calipers are found in the Seal Kit menu and sold as a 2pk to service one caliper- Some width calipers have one per and others 3 so check before ordering.

 

Images are available by clicking the underlined text. 

If unsure of your specific parts needs with regard to pistons, seals or bleeders please call before ordering to ensure you receive the proper items for you caliper.

Improperly ordered parts are subject to 15% restocking fee!

 

BRAKE FLUID

Wilwood 570 and EXP600 sold each

BLEEDER NIPPLE CAPS

Rubber caps keep the dirt out. Sold in packs of 8pcs

CAP & PLUG KIT

Cap off leaky hoses and calipers when servicing

Brake Fluid (ea)
Bleeder cap 8pc
Caps and Plugs

PAD SHIMS

Anti-squeal, sticky back shims

BLEEDER SCREWS

M10 and 1/8 NPT thread for all Wilwood calipers

CROSS OVER SEALS

Internal seals 6pk

Anti Squeal (pad no.)
Bleeder Screw Assembly (4pk)
 

DUST BOOTS

For dust booted calipers, sold each

COTTER PINS

Those long pins you can't find anywhere

BRIDGE BOLT KITS

Sold in pairs 

Dust Boot / Bellows
Cotter Pins
By Rotor Width

FOUR PISTON SEAL KITS

Equal or "square" bore calipers, 4pcs

FOUR PISTON SEAL KITS

Differential bore calipers, 4pcs

SIX PISTON SEAL KITS

For six piston calipers, 6pcs

Bore Size 4pk
Bore Size 4pk
Bore Sizes 6pk

SIX PISTON SEAL KITS

TX6 calipers WITH dust wipes, 6ea

HAT BOLT KITS

For most Wilwood apps

HAT BOLT KITS

For most TCE apps

Bore Sizes 6pk
Rotor Hat Bolt Kits
Rotor Hat Bolt Kits

PAD TENSION CLIPS

SS caliper body clips

PISTONS- SS: 1.03"

Longer of the two sizes

PISTONS- SS: .88"

Shorter of the two sizes

Tension Clips 4pk
1.03" tall
.88" tall

PAD RETAINER CLIPS

Wire clip for specific Wilwood calipers only

RES. PRES. VALVES

Two pressure options

Pad Pins and Clips

For Aero, W series and DP6

Pad Retention Clips
RPVs
Pad pins and clips

RADIAL SHIMs & NUTS

Shim pack and lock nuts for studs

CALIPER FITTINGS

Pipe thread and others

HARDLINE ADAPTERS

Assorted body line flex hose adapters

                        Thread Size               
Caliper Fittings, ea
Hardline Adapters, ea

BANJOS and BOLTS

Not for most Wilwood calipers

BODY BRACKETS

TCE's universal mounting bracket kit

CLINCH NUTS

Press fit nuts for caliper brackets

Banjos and Banjo Bolts
Hardline Brackets- bend to fit
Clinch Nuts, ea

KNUCKLE BUSHINGS

Reduces M12 holes to 7/16 SAE hardware

PAD WEAR SPACERS (4pc)

For longer pad life and piston control

HUBS

TCE Kits only 

Steeing Knuckle reducer bushings (2pc)
Pad Wear Spacer
Hubs- TCE Kits

CALIPER PLUGS (4pc)

Replaces unsightly non used bleeders

CENTERING SHIMS

3/8, 7/16 (M12), M14, M16

(8ea)  .015  and  .030 thick    

PISTON WRENCHES

Aluminum wrenches for piston removal.

Avalable in all Wilwood sizes 1.00 thru 2.375. Sold Each. 

Caliper Plugs- 4pk
Shims 8ea thickness
Piston Wrenches

TITANIUM HEAT SHIELDS

Insulate your calipers from heat!  (4pc)

Listed by Wilwood pad plate number

REAR AXLE KIT SPACERS

Wider spacers for axle offset adjustment on p-brake kits

Available in .090 and .125" thickness.  Sold each.

REAR AXLE C-CLIPS

 To control end float.  (1.530 OD .800 ID)

Ti Heat Shields
  *shipping incl.
Select size(s) Sold Each
Select size(s)

 

SHIPPING USPS PRIORITY MAIL SERVICE AND AVAILABLE TO U.S. RESIDENTS ONLY.

NO OUT OF COUNTRY ORDERS VIA SHOPPING CART

If you require overnight or ground UPS service or are not shipping to a US destination please call or email for a quote.


©2010 - 2014 TCE Performance

S1