|
FRONT KITS:
Call today to place your order or for more info! 480-967-7901
|
|
Plus 1: The W6A Caliper Kit- $1489
-
Wilwood W6A radial mount calipers (6 piston)
-
Choice of BLACK or RED powder coat finish
-
TCE spec billet aluminum radial mount brackets
-
BP10 street pads
-
Stainless steel hose kit
-
All required hardware
-
DOES NOT INCLUDE ROTORS
-
Optional Rotor Register Rings- ADD $35
-
Optional Wheel Spacer kit- n/a
|
Application: The first caliper upgrade kit to offer proven six piston performance and durability at and affordable prices! The TCE caliper kit will easily bolt to your stock spindle with very little modification. Improved response, pedal feel and heat dissipation adds to the long term durability of the brake system.
Fit: Fits stock 18s with 6mm wheel spacer. Available only for 13.75 (350mm) front rotors. See "Wheel Fit" page for specific requirements above.
Notes: Stock wheels require 6mm spacer. Stud length inspection is suggested. Requires minor clearance grinding on iron spindle for bracket clearance.
|
|
Plus 2: The TCE 14" W6A kit- tbd
-
Wilwood W6A Radial mount calipers (6 piston)
-
Choice of BLACK or RED powder coat finish
-
TCE billet radial mount brackets
-
TCE aluminum rotor hats
-
14.0" x 1.25" directional cast rotors
-
Gas slotted finish
-
BP10 street pads
-
Stainless steel hose kit
-
All required hardware
-
Optional cross drilled and slotted rotor finish- ADD $135
|
Application: Available upon further request...this kit is in the planning stage depending upon reception to the Caliper kit above. Added rotor width and functional mass make for a lower operating temp and durability under the most demanding of conditions. Interested? Contact TCE for more info.
Fit: Stock 18" wheels with spacers or 18" and larger.
Notes: CURRENTLY IN PLANNING PHASE
|
|
Plus 3: The TCE 16" Monster Kit- $3249
-
Wilwood TC6 Radial mount calipers
-
Choice of BLACK or RED powder coat finish
-
TCE spec billet aluminum radial mount brackets
-
TCE spec billet aluminum rotor hats
-
16" x 1.300" directional cast rotors
-
Gas slotted and zinc plated
-
BP10 street pads
-
Stainless steel hose kit
-
All required hardware
-
Optional Cross drilled and slotted rotors- ADD $135
|
Application: A massive front kit on par with our other "Monster" kits that offer a huge impact- both functional and visual. Originally produced a few years ago TCE is considering offering this kit once again as pricing has dropped some so the cost may be more user friendly now. Interested? Contact TCE for more info.
Fit: Requires 20" and larger wheels and is quite wheel friendly by design.
Notes: CURRENTLY BY SPCL ORDER ONLY
|
|
REAR KITS
Call today to place your order or for more info! 480-967-7901
|
|
Plus 1: The TCE Caliper Kit for Stock Rotors- $tbd
-
Wilwood calipers (4 piston)
-
Black powder coat finish to match fronts
-
BP10 street pads
-
TCE spec brackets
-
Stainless steel hose kit
-
All required hardware
-
Optional RED powder coat finish- ADD $125
-
DOES NOT INCLUDE ROTORS
|
Application: Complementing the popular W6A Front Kit this rear kit uses the same format; an alternate, multiple piston caliper upon the oe size rear rotor.
Fit: All stock and 18" and larger wheels.
Notes: CURRENTLY IN PLANNING PHASE
|
|
Plus 2: The TCE 14" Rear Kit- tbd
-
Wilwood W4A radial mount calipers (4 piston)
-
Choice of BLACK or RED powder coat finish
-
BP10 street pads
-
TCE radial mount brackets
-
14 x 1.10" directional cast GT rotors
-
Gas slotted finish
-
Iron parking brake hats
-
Stainless steel hose kit
-
All required hardware
-
Optional cross drilled rotor finish- ADD $100 Black, $135 Zinc
|
Application:
Fit: Stock and 18" and larger wheels.
Notes: BUILT BY SPECIAL ORDER ONLY
|
