|
FRONT KITS: 2003-2008
Call today to place your order or for more info! 480-967-7901
|
|
Plus 1: The TCE 12.2 street kit- $919
-
Wilwood Dyna Pro Radial calipers (4 piston)
-
Fully dust booted
-
TCE/Wilwood Radial mount brackets
-
Wilwood aluminum hats
-
12.2 x .810" UL-32 HP rotors
-
BP10 pads
-
TCE spec stainless steel hose kit
-
All required hardware
-
Optional Wilwood GT rotors (slotted)- ADD $100
-
Optional Drilled/Slotted rotors (black)- ADD $100
-
Optional Drilled/Slotted rotors (zinc)- ADD $135
-
Optional RED caliper color- ADD $85
|
APPLICATION: Intended for Street/Strip use where light weight and daily driver durability is desired. A great street performer for the enthusiast. Very affordably priced with many options for appearance as well as heavier rotor options for extended open track use.
FIT: Minimum Wheel Size 16"
NOTES:
|
|
Pus 2: The TCE 13" street kit- $1419
-
Wilwood Dyna Pro Six (DP6) 6 piston calipers
-
Choice of BLACK or RED powder coat finish
-
TCE aluminum mount brackets
-
TCE aluminum hats
-
13 x .810" Direction cast rotors
-
Gas slotted and zinc plated finish
-
BP10 pads
-
TCE spec stainless steel hose kit
-
All required hardware
-
Optional Drilled/Slotted rotors- ADD $135
|
APPLICATION: The most "all around" kit for the Street enthusiast looking for both functional and visual big brake improvements. Balances weight and wheel fit for for ample spoke clerance. Good for light track day use and drag racing where larger wheels are fit.
FIT: Minimum Wheel Size 17"
NOTE
|
|
Plus 2 HD- $1469
The "HD" version is identical to the above kit but includes 1.10 wide rotors rather than the .810 parts. This wider rotor increases thermal mass for more heat saturation when more spirited driving place greater demands on the kit. |
APPLICATION: The HD kit enhances the above kit by replacing the .810 rotors with heavier 1.10" wide parts while retaining the DP6 caliper. This kit can take track day punishment for a longer time as cooling is enhanced. Wheel clearance is compromised as the caliper is now closer to the wheel, available with the same options listed above.
FIT: Fits after market 17" and larger wheels, may fit stock wheels with minimal wheel spacer.
NOTES: |
|
|
|
|
REAR KITS
Call today to place your order or for more info! 480-967-7901
|
|
Plus 1: The Rear Rotor kit- $597
-
Billet aluminum rotor hats, Wilwood or TCE to match
-
11.75 x .375" solid rotors
-
Gas slotted and zinc plated
-
TCE spec stainless steel hose kit
-
All required hardware
-
Optional cross drilled rotor finish- ADD $135
|
APPLICATION: This two piece hat/rotor combo is paired to match your selected front kit. The stock rotor is removed and replaced with a much larger (more brake torque) 11.75 rotor yet retains the factory caliper and parking brake.
FIT: Minimum wheel size 16"
NOTES: |
