|
FRONT KITS
Call today to place your order or for more info! 480-967-7901
|
|
Plus 1: The TCE 14" Street Kit- $1895
-
Wilwood 14 x 1.10" GT directional cast rotors
-
Gas slotted and zinc plated
-
Wilwood 12 bolt, aluminum rotor hats
-
Wilwood BSL4r radial mount calipers
-
Fully dust booted/sealed design
-
TCE spec radial mounts
-
BP10 pads
-
TCE spec stainless steel hose kit
-
Optional RED powder coat finish- ADD $125
-
Optional cross drilled rotor finish- ADD $135
|
Application: The TCE Street kit for stock wheels. This complete front kit includes proven performance and durability with full 14" rotors and dust booted calipers.
Fit: Requires 18" or larger wheels.
Notes: Designed for maximum wheel clearance this kit can be boosted in performance for Open Track use by way of optional Stainless Steel pistons and proper pad selection. Its limitations are based on the fit of 1.10" wide rotors.
|
|
Plus 2: The TCE 14" Track Kit- $2249
-
WilwoodW4A Radial mount calipers (4 piston)
-
TCE spec radial mount brackets
-
Wilwood 14 x 1.25" GT rotors
-
Gas slotted
-
Wilwood 12 bolt, aluminum rotor hats
-
BP20 street & light duty track pads
-
TCE spec stainless steel hose kit
-
Optional RED powder coat finish- ADD $150
-
Optional cross drilled rotor finish- ADD $135
-
Optional custom 13.3" rotors- DEDUCT $150
|
Application: For the more demanding driver TCE offers a more beefy design using the larger W4A caliper and a choice of 13.3 or 14" rotors depending upon wheel size. These kits are of course 'streetable' with the proper pad choice and come with the elevated street performance and light track duty; BP20s. For Open track use alternate pads such as Poly B are urged.
Fit: Minimum 17" brake friendly wheels required for 13.3" kits and 18" wheels for 14" kits.
Notes: The 13.3" kit can be enlarged later to full 14" with new rotors and radial spacers.
|
|
REAR KITS
Call today to place your order or for more info! 480-967-7901
|
|
Plus 1: The Rotor kit- $579
-
Billet aluminum rotor hats
-
Caliper relocation brackets
-
13" x .750" vented rotors
-
Gas slotted and zinc plated
-
TCE spec stainless steel hose kit
-
All required hardware
-
Optional cross drilled rotor finish- ADD $135
|
Application: Matching rear rotor kit for the rear. Add full size rear rotors for improved brake response, added rotor torque and more thermal mass.
Fit: Stock and 18" or larger wheels.
Notes: Retains factory parking brake. Does not come with calipers.
|
