Eclipse 2G - Kits

CURRENT KITS

Eclipse 2G Kits

2G FRONT KITS: 1994-1999
2G Owners: To insure proper fit you MUST verify the hub in use on your car. All hats use a 'register ring' and that ring must match the OD of your hub for proper fit. Please see the image at right showing the later hub with two steps.

The TCE 13" Street Kit

Wilwood Dyna Pro Six (DP6) 6 piston calipers
Choice of BLACK or RED powder coat finish
TCE aluminum mount brackets
TCE aluminum hats
13 x 1.10" Direction cast rotors
Gas slotted
BP10 pads
TCE spec stainless steel hose kit
All required hardware
Optional Drilled/Slotted rotors

APPLICATION: The most "all around" kit for the Street enthusiast. Offers modest weight and balance for wheel fit, light track day use and drag racing where larger wheels are fit.

FIT: Minimum Wheel Size 17"

NOTES: The most versitle offering from TCE. The DP6 offers maximum wheel clearance, a stiff caliper body and is fit to a 1.10" rotor. However pads are thinner and more difficult to change than those of the FSL for track use.

The TCE 13" Track Kit

Wilwood Forged Super Lite (FSL) 4 piston calipers
Type III Grey anodized
TCE steel mount brackets
TCE aluminum hats
13 x 1.10" directional cast rotors
Gas slotted
Sold WITHOUT pads
TCE spec stainless steel hose kit
All required hardware

APPLICATION: For the open track day user where demands place more stress on the caliper body. This kit is built with the proven FSL 4 piston caliper using top loading pads for quick and easy service. These wide calipers offer full 20mm thick pads for long life and improved heat rejection to the fluid. Their larger size however will greatly compromise wheel fit. Simple, effective and low cost.

FIT: Minimum Wheel Size 17"

NOTES: Sold without brake pads. Choose from compounds 7420 and add to order.

The TCE 14" Aero6 Kit

Wilwood Aero6, 6 piston calipers
Choice of BLACK or RED powder coat finish
TCE Radial mount brackets
Wilwood aluminum hats
14 x 1.25" directional cast rotors
Gas slotted
BP10 pads
TCE spec stainless steel hose kit
All required hardware
Optional Drilled and Slotted rotors

APPLICATION: Supplied with street pads however this kit is intended for the most sever open track duty where greater rotor mass is desired . The Aero6 caliper offers a massive caliper body for increased strength and heat rejection. The pads are offer nearly 10% more cubic inches of the FSL/BSL part for longer live when durability is a must.

FIT: Minimum Wheel Size 18"

NOTES: Updated in 2017 with all new radial mount brackets- no grinding of spindle ears. Also now fit with Wilwood hats and Spec37 rotors.

2G REAR KITS

The TCE 13" P-Brake Kit

Wilwood Dyna Pro Lug Mount (DPLM) 4 piston calipers
Choice of BLACK or RED powder coat finish
Optional Type III Grey Anodized
TCE steel mounting brackets
TCE steel parking brake hats
13 x .810 directional cast rotors
Gas slotted
BP10 pads
TCE spec stainless steel hose kit
All required hardware
Optional Drilled/Slotted rotors

APPLICATION: A true all around performer for any use. Ample rotor mass for open track day use and tunable with many pad compounds. Great appearance, function and stock parking brake for street use.

FIT: Minimum Wheel Size 17"

NOTES: Retains Factory Iron Parking Brake. A non parking brake kit for race apps can be had by spcl order- call.

THE FINE PRINT:

FITMENT: It is up to the consumer to verify proper vehicle and wheel fit. Wheel clearance requirements can be found on the WHEEL FIT page in the TOOLBOX above. If you are unsure of the fit or application please call or email prior to ordering. TCE makes no guarantee of wheel clearance.

TERMS AND CONDITIONS: All sales subject to 20% restocking fee. Return shipping is on you. No credit will be given for installed, mishandled or damaged goods.

SHIPPING: Shipping charges will be applied in the Shopping Cart prior to check out. Prices are based on an average delivery zone. Additional shipping charges may apply to AK, CA and HI. Call before you order for details.

BRAKE PADS

SERVICE PARTS

Return to Kits