FRONT KITS
|
TCE/Wilwood Front Caliper Kit
- Wilwood FNSL6 radial mount calipers (6 piston)
- Choice of BLACK or RED powder coat finish
- BP10 street pads
- Radial mount brackets
- All required hardware
- SS flex line kit included for CV/MM owners
- Optional 3/16" wheel spacer kit for stock Marauder wheels- ADD $30
4 KITS REMAIN
|
APPLICATION: Designed for use on the stock 12" oe or aftermarket stock size rotor only. Replaces stock two piston sliding caliper offering more linear braking, superior feel and responsiveness as well a big brake appearance at a lower cost.
FIT: Requires 17" or larger wheels. Will require some clearance grinding of the stock aluminum spindle for bracket clearance. Wheel spacers may be needed based on wheel design.
NOTES: Please see the wheel fit page for required spoke clearance on all of these kits. Chrome MM wheels will require 3/16" spacer.
|
|
TCE/Wilwood 14" Kit
- Wilwood FNSL6 calipers with stainless steel pistons (6 piston)
- Choice of BLACK or RED powder coat finish
- TCE steel mount brackets
- TCE radial mount caliper brackets
- TCE spec billet aluminum rotor hats
- 14" x 1.10" directional cast rotors
- Gas slotted
- BP10 Street pads
- TCE spec Stainless Steel braided hose kit
- All required hardware
- Optional drilled and slotted rotors
- 2.25mm wheel spacer (test fit for your comfort)
|
APPLICATION: TCE has taken the Forged Narrow Super Lite 6 and fit some custom 14" x 1.10" wide rotors to make this the first true 14" kit capable of reasonable stock wheel fit!
FIT: Requires 18" or larger wheels. Will fit stock Marauder wheel. Supplied with 2.25mm spacer for optional use.
NOTES: Can be converted from our older 13" front kit for former customers looking to increase size. This is the only 14" kit designed specifically for the MM and to pair visually with our TCE 14" rear kit below. Call for more info on these details.
THE ONLY FRONT KIT THAT FITS STOCK WHEELS
|
|
Wilwood Factory 14" Aero6 Kit
- Wilwood Aero6 radial mount calipers (6 piston)
- Choice of BLACK or RED powder coat finish
- BP10 street pads
- Wilwood radial mount brackets
- 14 x 1.25" directional cast GT rotors
- Gas slotted
- BP10 Street pads
- Aluminum brake hats
- Stainless steel hose kit
- All required hardware
- Optional drilled and slotted rotors
|
Application: Wilwood's copy of our popular 14" front kt. The Aero6 calipers have roughly 20% more friction material than the FNSL6 and a stiffer body to control flex under extreme conditions.
Fit: Requires 18" and larger wheels. *Estimated spacer for stock Marauder wheel: 14mm. and require longer wheel studs.
Notes: This is a larger body caliper fit to the full width rotor. A great package but NOT for stock Marauder wheels. Will not match the rear kit caliper body design.
|
|
TCE/Wilwood 15" Aero6 Kit
- Wilwood Aero6 radial mount calipers (6 piston)
- Choice of BLACK or RED powder coat finish
- BP10 street pads
- TCE radial mount brackets
- 15 x 1.25" directional cast GT rotors
- Gas slotted
- BP10 Street pads
- Aluminum brake hats
- Stainless steel hose kit
- All required hardware
- Optional drilled and slotted rotors
|
Application: The custom, larger version of the above for those with 19" or larger wheels. This is the largest standard kit TCE has produced for the Marauder yet.
Fit: Requires 19" or arger wheels with spacers. (not supplied)
Notes: Will not match the rear kit caliper body design.
|
|
TCE/Wilwood 16" TC6R Kit
NOT AVAILABLE UNTIL LATE AUGUST
- Wilwood TC6R radial mount calipers (6 piston)
- Choice of BLACK or RED powder coat finish
- BP10 street pads
- TCE radial mount brackets
- 16 X 1.375" directional cast GT rotors
- Gas slotted finish
- BP10 Street pads
- Stailess steel hose kit
- Aluminum rotor plate
- All required hardware
- Optional drilled and slotted rotors
|
APPLICATION: The largest front kit available for the Panther platform. Based on similar kits usd on our truck and Caprice kits this one's huge!
FIT: Requires 20" or larger wheels.
NOTES: Very aggressive fitment due to the use of a rotor plate and zero hat offset. Please see the wheel fit page for required spoke clearance on all of these kits.
|
|
REAR KITS
|
TCE/Wilwoood Kit 14" Rear Kit
- Wilwood FNSL4 calipers with stainless steel pistons (4 piston)
- Choice of RED or BLACK powder coat finish
- 14" x .81" directional cast rotors
- Gas slotted
- Iron rotor hats for parking brake
- BP10 Street pads
- TCE steel mounting brackets
- TCE spec Stainless Steel braided hoses
- All required hardware
- Optional drilled and slotted rotors
|
APPLICATION: New, this is a larger version of our discontinued 13" kit and uses the radial mount FNSL4 caliper to accept the larger disc. Kit retains the factory parking brake.
FIT: Stock wheels and 18" or larger alternates.
NOTES: Requires disassembly and service of the differential for shimming purposes. *A $300 refundable core deposit is also required on the stock iron caliper mounts and dust plates. All cores must be returned in good condition and within 90 days from the date your kit shipped from TCE. Returns after 90 days will not be refunded.
|
You must pay the REFUNDABLE Core Chg.
|