CURRENT KITS

350Z and G35

370Z and G37

Caprice/Impala '71-'76

Caprice/Impala '77-'92

Charger, Challenger, Magnum, 300C

Chevy Colorado

CLEARANCE

Contour and Cougar

Corvette C2&C3

Corvette C4

Corvette C5, Z06

Corvette C6, Z06

Corvette C7

Countryman/Paceman by MINI

Crown Vic- Panther

Dodge RAM 1500

Eclipse 1G

Eclipse 2G

F150 (2010+)

Fiesta

Focus 00-'07

Focus 2012+

Ford Ranger

Fusion '13+

Impala SS 94-96

Jeep Cherokee

Juke

Lancia Scorpion

Lightning, Harley F150 99-04

Marauder

Mazda 3

Mazda 6

Mazda RX8

MINI 01-06

MINI 07-13

MINI 2014+

Mustang 05-13

Mustang 2015-

Mustang 94-04

SHO, Flex, Explorer, MKS 2010+

Solstice/Sky

SRT-4

Subaru WRX 08+

Subaru WRX 99-05

Super Duty 1999-2004

Super Duty 2005-2012

Super Duty 2013-2017

Toyota Tundra

XXX Customs

TCE Performance Products


Super Duty Kits

F250, F350, 4X4, Single Rear Wheel

 

TCE offers two versions of  F250 Kits. Our kits are ideal for those looking to improve braking for their daily driver or show truck. The TCE/Wilwood 16" kits now use the Wilwood TX6R caliper. This monster is not only larger and beefier than the olders TC6R but has roughly 15% more cubic pad material for longer life and heat rejection. The TX6 has more piston area for greater clamping force and less deflection under high pressure and pairs with the needs of the later spec master cylinders. But it comes at a price: it will require 22" and larger wheels due to the caliper body mass. The TCE kit is the only option for those looking for the sex appeal of Drilled and Slotted rotors due to their common 1.375" wide casting.

 

Wilwood factory kits are not only much lower cost but will fit most 20" wheels. These kits are intended more for the severe duty owner who tows on a regular basis. The huge 1.50" wide rotors offer a giant heat sink for dealing with heavy loads.

 

DRW customers: TCE can manufacture to suite: an additional cost of $150 for the rear and 2wk lead time.

 

FRONT KITS 2013+

TCE/Wilwood 16" TX6R Front Kit- $3030

  • Wilwood TX6R calipers  (six piston)
  • Type III Gray Anodized
  • Optional BLACK or RED powder coat finish
  • TCE spec radial mount brackets
  • Wilwood 16" x 1.375" GT rotors
  • Gas slotted
  • Wilwood forged aluminum rotor hats
  • BP20 pads
  • TCE spec stainless steel flex hose kit
  • All required hardware
  • Optional cross drilled and slotted rotor finish ADD $150

APPLICATION: TCE's original TX6 and the only 16" Wilwood based kit for the 2013 and up trucks. *Only full size kit available with Drilled and Slotted rotors.

 

FIT: 22" wheels recommended, may fit some 20s

 

NOTES: Longer +2.5" and +4.0" front hose kits available for high lift applications.

Wilwood 15" Wilwood TX6 Kit- $1984

  • Wilwood TX6R calipers  (six piston)
  • Type III Gray Anodized
  • Optional BLACK or RED powder coat finish
  • TCE spec radial mount brackets
  • Wilwood 16" x 1.375" GT rotors
  • Gas slotted
  • Wilwood forged aluminum rotor hats
  • BP20 pads
  • TCE spec stainless steel flex hose kit
  • All required hardware
  • Optional cross drilled and slotted rotor finish N/A

APPLICATION: The newest version of the SD line from Wilwood direct. This kit carries on the quality of build the earlier kits offer with 1.50" wide rotors for the most demanding of towing needs.

 

FIT: Fits most 20" wheels. See Wilwood page or email for template.

 

NOTES: Longer +2.5" and +4.0" front hose kits available for high lift applications.

REAR KITS  2013+

TCE/Wilwood 16" TX6R Rear Kit-  $2800

  • Wilwood TX6R calipers (6 piston)
  • Type III Gray Anodized
  • Optional BLACK or RED powder coat finish
  • TCE spec radial mount brackets
  • Wilwood 16" x 1.375" GT rotors
  • Gas slotted
  • TCE iron parking brake hats, powder coated
  • BP10 pads
  • TCE spec stainless steel flex hose kit
  • All required hardware
  • Optional cross drilled and slotted rotor finish ADD $150
  • DRW spcl order- ADD $150 (CALL)

APPLICATION: The newest version of our rear kit, like the front, used the new TX6R caliper with the same benefits as noted there. *Only full size kit available with Drilled and Slotted rotor finish.

 

FIT: 22" wheel rcoommended, may fit some 20s.

 

NOTES: Requires fairly extensive trimming of the factory dust shield for clearance. Single Rear Wheel only. Rear hoses are about 10" long and requrie "cut and flare" of the existing harline.

 

Wilwood 15.5" Wilwood TX6 kit- $1984

  • Wilwood TX6R calipers (6 piston)
  • Type III Gray Anodized
  • Optional BLACK or RED powder coat finish
  • TCE spec radial mount brackets
  • Wilwood 16" x 1.375" GT rotors
  • Gas slotted
  • TCE iron parking brake hats, powder coated
  • BP10 pads
  • TCE spec stainless steel flex hose kit
  • All required hardware
  • Optional cross drilled and slotted rotor finish N/A

APPLICATION: The newest of the Wilwood factory kits. 

 

FIT: Requires 20" or larger wheels. 

 

NOTES: Single Rear Wheel only. Rear hoses are about 10" long and requrie "cut and flare" of the existing harline.

 

ONLINE ORDERING

F250 2013+   TCE Combo Kits
Select Front, Rear or Combo- Front and Rear. Base kits slotted only, choice of black or red calipers. Optional Drilled & Slotted rotors. Flat rate shipping charges applied at check out. Calipers, pads and rotors drop ship from Wilwood. All other items ship from TCE directly. These kits are produced in somewhat limited quantity. Expect 2wk build time based upon inventory levels. Longer front hoses available for lifted trucks.
TX6R Front Kit Options
TX6R Rear Kit Options
TX6R Combo Kit Options

 

F250 2013+   Wilwood Combo Kits
Select Front, Rear or Combo- Front and Rear. Base kits slotted only, choice of black, red or clear calipers. Optional Drilled & Slotted rotors. Flat rate shipping charges applied at check out. Calipers, pads and rotors drop ship from Wilwood. All other items ship from TCE directly. These kits are produced in somewhat limited quantity. Expect 2wk build time based upon inventory levels. Longer front hoses available for lifted trucks.
TX6 Front Kit Options
TX6 Rear Kit Options
TX6 COMBO Kit Options

 

FITMENT:  It is up to the consumer to verify both vehicle and wheel fit. Application data is available by clicking the HELP ME INSTALL IT link for both front and rear kits. Wheel fit data can be viewed on page 3 of that pdf. It is up to the consumer to determine the suitablity of use for any and all products upon their vehicle. TCE makes no claim to fit beyond the data referenced above.

 
     

 

BRAKE PADS

SEICE PARTS

 



Return to Kits


©2010 - 2014 TCE Performance

S1